2013-2016 Ford Fusion Timing Chain Kit Torque Specs

2.5L I4

Applies to 2013, 2014, 2015, and 2016 Ford Fusion

Labor Time:9 hours

Torque Values (30 specifications)

Component	Nm	lb-ft	Notes
Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
⚠️ Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Guide Bolts	24	18	—
⚠️ Guide Bolts	24	18	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pump Bolts	12	9	—
Oil Pump Bolts	12	9	—
Tensioner Bolt	20	15	—
⚠️ Tensioner Bolt	20	15	—
Timing Chain Guide Bolts	12	9	Replace if worn
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Idler Sprocket	25	18	—
⚠️ Timing Chain Idler Sprocket	25	18	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Cover Bolts	14	10	—
⚠️ Timing Cover Bolts	14	10	—
⚠️ Timing Cover Bolts - 10mm	45	33	Tighten in sequence
Timing Cover Bolts - 10mm	45	33	Tighten in sequence
Timing Cover Bolts - 6mm	10	7	Tighten in sequence
Timing Cover Bolts - 6mm	10	7	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

The primary torque specification for timing chain kit on a 2013-2016 Ford Fusion is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

There are 30 torque specifications for timing chain kit on the 2013-2016 Ford Fusion 2.5L I4, covering all related fasteners and components.