1990-1997 Ford Ranger Harmonic Balancer Torque Specs

2.3L I4

Applies to 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997 Ford Ranger

Labor Time:2 hours

Torque Values (9 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	180	133	Often TTY, may need impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—

The primary torque specification for harmonic balancer on a 1990-1997 Ford Ranger is 16 Nm (12 lb-ft).

There are 9 torque specifications for harmonic balancer on the 1990-1997 Ford Ranger 2.3L I4, covering all related fasteners and components.