2004-2012 GMC Canyon Head Gasket - Single Torque Specs

2.8L I4

Applies to 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, and 2012 GMC Canyon

Labor Time:12 hours

Torque Values (42 specifications)

Component	Nm	lb-ft	Notes
Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
⚠️ Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	18	13	—
Cover Bolts	18	13	—
Cylinder Head Bolts	93	68	Multi-step + angle
⚠️ Cylinder Head Bolts	93	68	Multi-step + angle
⚠️ Cylinder Head Bolts Step 1	40	30	Always use new TTY bolts
Cylinder Head Bolts Step 1	40	30	Always use new TTY bolts
⚠️ Cylinder Head Bolts Step 2	80	59	Tighten in sequence
Cylinder Head Bolts Step 2	80	59	Tighten in sequence
⚠️ Cylinder Head Bolts Step 3 (90 deg)	10	7	Plus 90 degrees
Cylinder Head Bolts Step 3 (90 deg)	10	7	Plus 90 degrees
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	Tighten in sequence
Intake Manifold Bolts	25	18	Tighten in sequence
⚠️ Mounting Bolts	50	37	—
Mounting Bolts	50	37	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Thermostat Housing Bolts	15	11	—
Thermostat Housing Bolts	15	11	—
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
⚠️ Water Pump Bolts	25	18	Tighten in criss-cross pattern
Water Pump Bolts	25	18	Tighten in criss-cross pattern

Other Jobs with Torque Specs

Common Questions

What is the torque spec for head gasket - single on a 2004-2012 GMC Canyon?

The primary torque specification for head gasket - single on a 2004-2012 GMC Canyon is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for GMC Canyon head gasket - single?

There are 42 torque specifications for head gasket - single on the 2004-2012 GMC Canyon 2.8L I4, covering all related fasteners and components.