2012-2016 Honda CR-V Head Gaskets - Both Torque Specs

2.4L I4

Applies to 2012, 2013, 2014, 2015, and 2016 Honda CR-V

Labor Time:18.9 hours

Torque Values (12 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	16	12	Torque sequence
Camshaft Cap Bolts	16	12	Torque sequence
⚠️ Cylinder Head Bolts	39 +180°	29	Step 1: 29 lb-ft. Step 2: +90 degrees. Step 3: +90 degrees. Tighten in sequence. Use new bolts.
Cylinder Head Bolts	39 +180°	29	Step 1: 29 lb-ft. Step 2: +90 degrees. Step 3: +90 degrees. Tighten in sequence. Use new bolts.
⚠️ Cylinder Head Bolts (Older/Reuse)	39	29	If reusing bolts (not recommended): Step 1: 29 lb-ft. Step 2: +90 deg. Step 3: +90 deg. Verify length.
Cylinder Head Bolts (Older/Reuse)	39	29	If reusing bolts (not recommended): Step 1: 29 lb-ft. Step 2: +90 deg. Step 3: +90 deg. Verify length.
⚠️ Exhaust Manifold Nuts	34	25	—
Exhaust Manifold Nuts	34	25	—
⚠️ Intake Manifold Bolts	24	18	—
Intake Manifold Bolts	24	18	—
⚠️ Valve Cover Bolts	14	10	—
Valve Cover Bolts	14	10	—

The primary torque specification for head gaskets - both on a 2012-2016 Honda CR-V is 16 Nm (12 lb-ft). Note: Torque sequence

There are 12 torque specifications for head gaskets - both on the 2012-2016 Honda CR-V 2.4L I4, covering all related fasteners and components.