Steering Angle Sensor Torque Specifications

2008-2010 Hummer H3 Alpha 5.3L V8

Labor Time:1 hours

Torque Values (12 specifications)

Component	Nm	lb-ft	Notes
⚠️ Coupling Bolt	42	31	—
Cover Screws	14	10	—
Mounting Bolts	34	25	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	127	94	—
⚠️ Rack Mounting Bolts	127	94	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	68	50	Use new cotter pin
⚠️ Tie Rod Nut	68	50	—
⚠️ Wheel Lug Nuts	169	125	—
⚠️ Wheel Lug Nuts	169	125	—

The primary torque specification for steering angle sensor on a 2008-2010 Hummer H3 Alpha is 42 Nm (31 lb-ft).

There are 12 torque specifications for steering angle sensor on the 2008-2010 Hummer H3 Alpha 5.3L V8, covering all related fasteners and components.