2001-2011 Mazda Tribute Head Gasket - Single Torque Specs

2.3L I4

Applies to 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, and 2011 Mazda Tribute

Labor Time:12 hours

Torque Values (32 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
Camshaft Bearing Cap Bolts	14	10	Tighten in sequence, 3 passes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
⚠️ Cylinder Head Bolts	88	65	Multi-step + angle
Cylinder Head Bolts	88	65	Multi-step + angle
Cylinder Head Bolts Step 1	40	30	Always use new TTY bolts
⚠️ Cylinder Head Bolts Step 1	40	30	Always use new TTY bolts
Cylinder Head Bolts Step 2	80	59	Tighten in sequence
⚠️ Cylinder Head Bolts Step 2	80	59	Tighten in sequence
⚠️ Cylinder Head Bolts Step 3 (90 deg)	10	7	Plus 90 degrees
Cylinder Head Bolts Step 3 (90 deg)	10	7	Plus 90 degrees
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
Intake Manifold Bolts	25	18	Tighten in sequence
⚠️ Intake Manifold Bolts	25	18	Tighten in sequence
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Thermostat Housing Bolts	15	11	—
Thermostat Housing Bolts	15	11	—
⚠️ Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Guide Bolts	12	9	Replace if worn
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence
⚠️ Water Pump Bolts	25	18	Tighten in criss-cross pattern
Water Pump Bolts	25	18	Tighten in criss-cross pattern

Other Jobs with Torque Specs

Common Questions

What is the torque spec for head gasket - single on a 2001-2011 Mazda Tribute?

The primary torque specification for head gasket - single on a 2001-2011 Mazda Tribute is 14 Nm (10 lb-ft). Note: Tighten in sequence, 3 passes

How many torque specs are there for Mazda Tribute head gasket - single?

There are 32 torque specifications for head gasket - single on the 2001-2011 Mazda Tribute 2.3L I4, covering all related fasteners and components.