2000-2012 Mitsubishi Eclipse GT Short Block Replacement Torque Specs

3.0L V6

Applies to 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, and 2012 Mitsubishi Eclipse GT

Labor Time:15 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	18	13	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	5	—
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	21	16	—
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	50	37	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2000-2012 Mitsubishi Eclipse GT?

The primary torque specification for short block replacement on a 2000-2012 Mitsubishi Eclipse GT is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Mitsubishi Eclipse GT short block replacement?

There are 16 torque specifications for short block replacement on the 2000-2012 Mitsubishi Eclipse GT 3.0L V6, covering all related fasteners and components.