2009-2012 Ram 1500 Intake Manifold Torque Specs

4.7L V8

Applies to 2009, 2010, 2011, and 2012 Ram 1500

Labor Time:3.9 hours

Torque Values (18 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
Cover Bolts	16	12	—
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
⚠️ Fuel Rail Bolts	12	9	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Fuel Rail Bolts	12	9	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	Tighten in sequence from center out \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Intake Manifold Bolts	25	18	Tighten in sequence from center out \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Mounting Bolts	47	35	—
⚠️ Mounting Bolts	47	35	—
PCV Valve	8	6	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ PCV Valve	8	6	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Throttle Body Bolts	10	7	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Throttle Body Bolts	10	7	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

The primary torque specification for intake manifold on a 2009-2012 Ram 1500 is 16 Nm (12 lb-ft).

There are 18 torque specifications for intake manifold on the 2009-2012 Ram 1500 4.7L V8, covering all related fasteners and components.