2009-2012 Ram 1500 Variable Valve Timing Actuator Torque Specs

4.7L V8

Applies to 2009, 2010, 2011, and 2012 Ram 1500

Labor Time:3.9 hours

Torque Values (28 specifications)

Component	Nm	lb-ft	Notes
⚠️ Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
Gasket Bolts	20	15	—
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Mounting Bolts	47	35	—
Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
VVT Solenoid Bolt	10	7	—
VVT Solenoid Bolt	10	7	—
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for variable valve timing actuator on a 2009-2012 Ram 1500?

The primary torque specification for variable valve timing actuator on a 2009-2012 Ram 1500 is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Ram 1500 variable valve timing actuator?

There are 28 torque specifications for variable valve timing actuator on the 2009-2012 Ram 1500 4.7L V8, covering all related fasteners and components.