2013-2018 Ram 2500 Short Block Replacement Torque Specs

6.7L I6 Cummins Diesel

Applies to 2013, 2014, 2015, 2016, 2017, and 2018 Ram 2500

Labor Time:24 hours

Torque Values (28 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	22	16	—
Cover Bolts	22	16	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Gasket Bolts	27	20	—
⚠️ Gasket Bolts	27	20	—
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	64	47	—
Mounting Bolts	37	27	—
Mounting Bolts	37	27	—
Mounting Bolts	64	47	—
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Pan Bolts	12	9	—
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Oil Pump Bolts	12	9	—
Sensor Bolts	15	11	—
Sensor Bolts	15	11	—
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Transmission-to-Engine Bolts	55	41	—
Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2013-2018 Ram 2500?

The primary torque specification for short block replacement on a 2013-2018 Ram 2500 is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Ram 2500 short block replacement?

There are 28 torque specifications for short block replacement on the 2013-2018 Ram 2500 6.7L I6 Cummins Diesel, covering all related fasteners and components.