2005-2009 Saab 9-7X Head Gaskets - Both Torque Specs

5.3L V8

Applies to 2005, 2006, 2007, 2008, and 2009 Saab 9-7X

Labor Time:18 hours

Torque Values (17 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	20	15	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Cylinder Head Bolts	110	81	Multi-step + angle
Electrical Connector Bolts	8	6	—
⚠️ Exhaust Manifold Nuts	42	31	—
⚠️ Gasket Surface Bolts	26	19	Clean mating surfaces
⚠️ Intake Manifold Bolts	31	23	—
⚠️ Mounting Bolts	60	44	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Sensor Mounting Bolts	10	7	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
VVT Solenoid Bolt	10	7	—
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for head gaskets - both on a 2005-2009 Saab 9-7X?

The primary torque specification for head gaskets - both on a 2005-2009 Saab 9-7X is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Saab 9-7X head gaskets - both?

There are 17 torque specifications for head gaskets - both on the 2005-2009 Saab 9-7X 5.3L V8, covering all related fasteners and components.