2010-2012 Subaru Outback Brake Fluid Flush Torque Specs

2.5L H4

Applies to 2010, 2011, and 2012 Subaru Outback

Labor Time:0.8 hours

Torque Values (8 specifications)

Component	Nm	lb-ft	Notes
⚠️ Bleeder Screw	10	7	Do not overtighten \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Bracket Bolts	102	75	—
⚠️ Caliper Bolts	88	65	—
⚠️ Caliper Bracket Bolts - Front	120	88	Threadlocker recommended \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Slide Pin Bolts	35	26	Apply silicone brake grease \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Master Cylinder Cap	4	3	Hand tight
Mounting Bolts	27	20	—
⚠️ Wheel Lug Nuts	140	103	Torque in star pattern \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

Other Jobs with Torque Specs

Common Questions

What is the torque spec for brake fluid flush on a 2010-2012 Subaru Outback?

The primary torque specification for brake fluid flush on a 2010-2012 Subaru Outback is 10 Nm (7 lb-ft). Note: Do not overtighten | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Subaru Outback brake fluid flush?

There are 8 torque specifications for brake fluid flush on the 2010-2012 Subaru Outback 2.5L H4, covering all related fasteners and components.