2010-2012 Subaru Outback Oil Pump Torque Specs

3.6L H6

Applies to 2010, 2011, and 2012 Subaru Outback

Labor Time:6 hours

Torque Values (12 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	19	14	—
Electrical Connector Bolts	8	6	—
⚠️ Gasket Bolts	23	17	—
⚠️ Gasket Surface Bolts	23	17	Clean mating surfaces
⚠️ Mounting Bolts	54	40	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
⚠️ Oil Pump Pickup Tube	12	9	—
Sensor Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence

The primary torque specification for oil pump on a 2010-2012 Subaru Outback is 19 Nm (14 lb-ft).

There are 12 torque specifications for oil pump on the 2010-2012 Subaru Outback 3.6L H6, covering all related fasteners and components.