2017-2020 Tesla Model 3 Variable Valve Timing Actuator Torque Specs

Performance Dual Motor AWD

Applies to 2017, 2018, 2019, and 2020 Tesla Model 3

Labor Time:8 hours

Torque Values (17 specifications)

Component	Nm	lb-ft	Notes
⚠️ Cam Phaser Bolt	65	48	Apply threadlocker, hold cam stationary
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
Mounting Bolts	27	20	—
⚠️ Mounting Bolts	47	35	—
⚠️ Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
VVT Solenoid Bolt	10	7	—
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for variable valve timing actuator on a 2017-2020 Tesla Model 3?

The primary torque specification for variable valve timing actuator on a 2017-2020 Tesla Model 3 is 65 Nm (48 lb-ft). Note: Apply threadlocker, hold cam stationary

How many torque specs are there for Tesla Model 3 variable valve timing actuator?

There are 17 torque specifications for variable valve timing actuator on the 2017-2020 Tesla Model 3 Performance Dual Motor AWD, covering all related fasteners and components.