2014-2016 Tesla Model S Valve Job - Complete Torque Specs

P85D Dual Motor AWD

Applies to 2014, 2015, and 2016 Tesla Model S

Labor Time:8 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Camshaft Sprocket Bolt	80	59	Hold cam with wrench on hex
Cover Bolts	16	12	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	7	5	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	—
⚠️ Mounting Bolts	47	35	—
⚠️ Rocker Arm Bolts	30	22	Tighten with cam lobe pointing away
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for valve job - complete on a 2014-2016 Tesla Model S?

The primary torque specification for valve job - complete on a 2014-2016 Tesla Model S is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Tesla Model S valve job - complete?

There are 16 torque specifications for valve job - complete on the 2014-2016 Tesla Model S P85D Dual Motor AWD, covering all related fasteners and components.