2001-2007 Toyota Highlander Short Block Replacement Torque Specs

2.4L I4

Applies to 2001, 2002, 2003, 2004, 2005, 2006, and 2007 Toyota Highlander

Labor Time:17.2 hours

Torque Values (28 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Gasket Bolts	20	15	—
⚠️ Gasket Bolts	20	15	—
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	47	35	—
Mounting Bolts	27	20	—
Mounting Bolts	27	20	—
Mounting Bolts	47	35	—
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Pan Bolts	12	9	—
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Oil Pump Bolts	12	9	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Transmission-to-Engine Bolts	55	41	—
Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2001-2007 Toyota Highlander?

The primary torque specification for short block replacement on a 2001-2007 Toyota Highlander is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Toyota Highlander short block replacement?

There are 28 torque specifications for short block replacement on the 2001-2007 Toyota Highlander 2.4L I4, covering all related fasteners and components.