2015-2024 Dodge Challenger SRT Hellcat Short Block Replacement Torque Specs

6.2L V8 Supercharged

Applies to 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Dodge Challenger SRT Hellcat

Labor Time:15 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	22	16	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	9	7	—
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	27	20	—
⚠️ Gasket Surface Bolts	27	20	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	64	47	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Sensor Bolts	15	11	—
Sensor Mounting Bolts	15	11	—
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2015-2024 Dodge Challenger SRT Hellcat?

The primary torque specification for short block replacement on a 2015-2024 Dodge Challenger SRT Hellcat is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Dodge Challenger SRT Hellcat short block replacement?

There are 16 torque specifications for short block replacement on the 2015-2024 Dodge Challenger SRT Hellcat 6.2L V8 Supercharged, covering all related fasteners and components.