1998-2004 Dodge Intrepid Front Main Seal Torque Specs

2.7L V6

Applies to 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Dodge Intrepid

Labor Time:4 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	17	13	—
Cover Bolts	18	13	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	21	16	—
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	180	133	Often TTY, may need impact
Mounting Bolts	28	21	—
⚠️ Mounting Bolts	50	37	—
⚠️ Mounting Bolts	50	37	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Pan Bolts	12	9	Front section only
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Cover Bolts - 10mm	45	33	Tighten in sequence
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence

The primary torque specification for front main seal on a 1998-2004 Dodge Intrepid is 17 Nm (13 lb-ft).

There are 16 torque specifications for front main seal on the 1998-2004 Dodge Intrepid 2.7L V6, covering all related fasteners and components.