2005-2009 Saab 9-7X Driveshaft Torque Specs

4.2L I6

Applies to 2005, 2006, 2007, 2008, and 2009 Saab 9-7X

Labor Time:1.5 hours

Torque Values (11 specifications)

Component	Nm	lb-ft	Notes
⚠️ Axle Nut	244	180	Use new nut, stake after
⚠️ CV Bolts	61	45	—
⚠️ CV Joint Bolts	61	45	—
Cover Screws	11	8	—
⚠️ Differential Cover Bolts	34	25	Apply RTV sealant
⚠️ Differential Yoke Pinion Nut	200	148	Mark position before removal
⚠️ Driveshaft Bolts	75	55	—
Driveshaft Center Support	35	26	—
⚠️ Driveshaft U-Joint Straps	20	15	Tighten evenly
Mounting Bolts	27	20	—
⚠️ Wheel Lug Nuts	136	100	—

The primary torque specification for driveshaft on a 2005-2009 Saab 9-7X is 244 Nm (180 lb-ft). Note: Use new nut, stake after

There are 11 torque specifications for driveshaft on the 2005-2009 Saab 9-7X 4.2L I6, covering all related fasteners and components.