2010-2014 Subaru Outback Harmonic Balancer Torque Specs

2.5L H4

Applies to 2010, 2011, 2012, 2013, and 2014 Subaru Outback

Labor Time:2 hours

Torque Values (12 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
Cover Bolts	16	12	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	20	15	—
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Harmonic Balancer Bolt	180	133	Often TTY, may need impact \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Mounting Bolts	27	20	—
⚠️ Mounting Bolts	47	35	—
⚠️ Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—

The primary torque specification for harmonic balancer on a 2010-2014 Subaru Outback is 16 Nm (12 lb-ft).

There are 12 torque specifications for harmonic balancer on the 2010-2014 Subaru Outback 2.5L H4, covering all related fasteners and components.