P0088high severityPowertrain
Fuel Rail/System Pressure - Too High
on 2013 Audi R8 5.2L V10 (Gen 1, 525hp) · AWD
What this code means
The fuel rail pressure is higher than the PCM commanded value.
Symptoms
- Check Engine Light
- Hard starting
- Rich running
- Injector damage risk
- Black exhaust smoke
Common causes
- Faulty fuel pressure regulator
- Restricted fuel return line
- Stuck fuel pressure relief valve
Diagnostic steps
- Monitor fuel pressure with scan tool
- Test fuel pressure regulator
- Check return line for restriction
- Inspect relief valve
Repair notes
Replace fuel pressure regulator or clear fuel return restriction.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1