P2400
EVAP Leak Detection Pump Control Circuit Open
1992-1996 BMW 318is E36 1.8L I4 🇩🇪
Moderate SeverityPowertrain
Description
Open circuit in the EVAP leak detection pump control wiring.
Symptoms
- Check engine light
- EVAP monitor incomplete
Common Causes
- Broken wiring to LDP
- Failed pump motor
- Corroded connector
- Blown fuse
Diagnostic Steps
- Check fuse
- Inspect LDP connector
- Measure pump resistance
- Check wiring continuity
Repair Notes
Repair wiring or replace leak detection pump.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2400 on Other Vehicles
Common Questions
What does code P2400 mean on a 1992-1996 BMW 318is E36?
P2400 stands for "EVAP Leak Detection Pump Control Circuit Open". Open circuit in the EVAP leak detection pump control wiring.
What are the symptoms of P2400 on a BMW 318is E36?
Common symptoms of P2400 include: Check engine light, EVAP monitor incomplete.
What causes P2400 on a 1992-1996 BMW 318is E36?
Common causes of P2400 include: Broken wiring to LDP, Failed pump motor, Corroded connector, Blown fuse.