P0717
Input/Turbine Speed Sensor Circuit No Signal
1999-2000 BMW 323i E46 2.5L I6 🇩🇪
High SeverityPowertrain
Description
No signal from the input speed sensor.
Symptoms
- No shifting
- Limp mode
- Stuck in gear
Common Causes
- Faulty sensor
- Open wiring
- Disconnected connector
Diagnostic Steps
- Test sensor signal
- Check wiring
- Verify connector
Repair Notes
Replace sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0717 on Other Vehicles
Common Questions
What does code P0717 mean on a 1999-2000 BMW 323i E46?
P0717 stands for "Input/Turbine Speed Sensor Circuit No Signal". No signal from the input speed sensor.
What are the symptoms of P0717 on a BMW 323i E46?
Common symptoms of P0717 include: No shifting, Limp mode, Stuck in gear.
What causes P0717 on a 1999-2000 BMW 323i E46?
Common causes of P0717 include: Faulty sensor, Open wiring, Disconnected connector.