P0607
Control Module Performance
1999-2000 BMW 528iT E39 2.8L I6 🇩🇪
High SeverityPowertrain
Description
The PCM is not performing within expected parameters.
Symptoms
- Check Engine Light
- Various issues
- Possible limp mode
Common Causes
- PCM internal issue
- Power supply problem
- Software glitch
Diagnostic Steps
- Check PCM power and grounds
- Reprogram PCM
- Check for TSBs
Repair Notes
Reprogram or replace PCM.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0607 on Other Vehicles
Common Questions
What does code P0607 mean on a 1999-2000 BMW 528iT E39?
P0607 stands for "Control Module Performance". The PCM is not performing within expected parameters.
What are the symptoms of P0607 on a BMW 528iT E39?
Common symptoms of P0607 include: Check Engine Light, Various issues, Possible limp mode.
What causes P0607 on a 1999-2000 BMW 528iT E39?
Common causes of P0607 include: PCM internal issue, Power supply problem, Software glitch.