Back to 2013 BMW M3 E90

2013 BMW M3 E90

4.0L V8 S65RWDDCTgas
Repairs0Labor499Torque3925Fluid7DTC909Battery0Maintenance0Recalls0
P1555critical severityPowertrain

Charge Pressure Upper Limit Exceeded

on 2013 BMW M3 E90 4.0L V8 S65 · RWD

What this code means

The DME detected that the turbocharger boost pressure has exceeded the maximum allowed limit. This is an overboost condition that can cause severe engine damage if not addressed immediately.

Symptoms

  • Check Engine Light
  • Reduced power mode
  • Overboost felt as sudden power surge
  • Engine may shut down
  • Possible engine knock

Common causes

  • Wastegate stuck closed
  • Boost control solenoid failure
  • Wastegate actuator diaphragm leak
  • Charge pipe leak causing incorrect sensor reading
  • Boost pressure sensor fault

Diagnostic steps

  1. Monitor actual vs target boost pressure
  2. Test wastegate operation manually
  3. Check boost control solenoid
  4. Inspect charge pipes for leaks
  5. Test boost pressure sensor accuracy

Repair notes

Immediately repair the overboost condition to prevent engine damage; check wastegate and boost control solenoid.

Other Powertrain codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →