HO2S Heater Warm Up Control Circuit Bank 1
2002-2007 Buick Rendezvous 3.5L V6 🇩🇪
Description
The PCM detected a problem with the heated oxygen sensor warm-up heater control circuit for Bank 1 Sensor 1. The heater circuit is not achieving the expected performance during engine warm-up.
Symptoms
- Check Engine Light
- Poor cold-start emissions
- Slow O2 sensor response when cold
- Poor fuel economy during warmup
Common Causes
- Faulty O2 sensor heater
- Heater relay failure
- Corroded connections
- High resistance in heater circuit
Diagnostic Steps
- Test O2 sensor heater resistance
- Check heater relay operation
- Inspect wiring for corrosion
- Monitor heater current with scan tool
Repair Notes
Replace O2 sensor if heater element has failed. Check relay and wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1032 on Other Vehicles
Common Questions
What does code P1032 mean on a 2002-2007 Buick Rendezvous?
P1032 stands for "HO2S Heater Warm Up Control Circuit Bank 1". The PCM detected a problem with the heated oxygen sensor warm-up heater control circuit for Bank 1 Sensor 1. The heater circuit is not achieving the expected performance during engine warm-up.
What are the symptoms of P1032 on a Buick Rendezvous?
Common symptoms of P1032 include: Check Engine Light, Poor cold-start emissions, Slow O2 sensor response when cold, Poor fuel economy during warmup.
What causes P1032 on a 2002-2007 Buick Rendezvous?
Common causes of P1032 include: Faulty O2 sensor heater, Heater relay failure, Corroded connections, High resistance in heater circuit.