Back to 2012 Chevrolet Celta

2012 CHEVROLET CELTA

1.0L I4 Flex VHC-EFWDAUTOMATICgas
Repairs0Labor512Torque383Fluid6DTC952Battery1Maintenance0Recalls0
C0079moderate severityChassis

Steering Position Sensor Circuit High

on 2012 Chevrolet Celta 1.0L I4 Flex VHC-E · FWD

What this code means

The steering angle sensor signal voltage is higher than the maximum expected value.

Symptoms

  • Stability control disabled
  • ESC light on
  • Incorrect steering position displayed

Common causes

  • Signal wire open circuit
  • Short to battery voltage
  • Sensor reference voltage issue
  • Sensor failure

Diagnostic steps

  1. Test signal voltage at sensor connector
  2. Check for open circuits in signal wire
  3. Verify reference voltage
  4. Monitor output through full range
  5. Inspect connector pins

Repair notes

Repair open circuit or replace steering angle sensor.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →