Fuel Volume Regulator Control Circuit High
2020-2024 Citroën C4 Electric 🇩🇪
Description
The PCM detected a higher than expected signal from the fuel volume regulator control circuit.
Symptoms
- Check Engine Light
- High fuel pressure
- Rich running
- Black exhaust smoke
Common Causes
- Open in regulator ground circuit
- Faulty regulator
- PCM driver failure
- Wiring issue
Diagnostic Steps
- Check circuit voltage
- Test regulator resistance
- Inspect ground connection
- Check PCM output
Repair Notes
Repair open circuit or replace regulator.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0004 on Other Vehicles
Citroën Berlingo
2018-2024 1.2L I3 PureTech
Citroën Berlingo
2018-2024 1.5L I4 BlueHDi
Citroën Berlingo
2018-2025 1.2L I3 Turbo PureTech 110
Citroën Berlingo
2018-2025 1.5L I4 Diesel BlueHDi 100
Citroën Berlingo III FR
2018-2025 1.2L I3 Turbo PureTech 110
Citroën Berlingo III FR
2018-2025 1.5L I4 Diesel BlueHDi 100
Citroën C1 III
2014-2022 1.0L I3 VTi 72
Citroën C1 III
2014-2022 1.2L I3 PureTech 82
Common Questions
What does code P0004 mean on a 2020-2024 Citroën C4?
P0004 stands for "Fuel Volume Regulator Control Circuit High". The PCM detected a higher than expected signal from the fuel volume regulator control circuit.
What are the symptoms of P0004 on a Citroën C4?
Common symptoms of P0004 include: Check Engine Light, High fuel pressure, Rich running, Black exhaust smoke.
What causes P0004 on a 2020-2024 Citroën C4?
Common causes of P0004 include: Open in regulator ground circuit, Faulty regulator, PCM driver failure, Wiring issue.