Module Not Configured
2020-2024 Citroën C4 Electric 🇩🇪
Description
A control module has been installed but not configured or initialized for operation in this vehicle.
Symptoms
- Module features not working
- System reports module not present
- Cannot access module settings
- Module in manufacturing mode
Common Causes
- New module not initialized
- Configuration procedure not performed
- Module programming incomplete
- End-of-line setup not done
Diagnostic Steps
- Perform module initialization procedure
- Run post-installation configuration
- Program module with vehicle data
- Complete setup routine
- Verify module exits manufacturing mode
Repair Notes
Complete the module initialization and configuration procedure using the manufacturer tool.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U2064 on Other Vehicles
Citroën Ami
2020-2025 Electric 5.5kWh
Citroën Berlingo
2018-2024 1.2L I3 PureTech
Citroën Berlingo
2018-2024 1.5L I4 BlueHDi
Citroën Berlingo
2018-2025 1.2L I3 Turbo PureTech 110
Citroën Berlingo
2018-2025 1.5L I4 Diesel BlueHDi 100
Citroën Berlingo
2021-2025 Electric e-Berlingo 50kWh
Citroën Berlingo III FR
2018-2025 1.2L I3 Turbo PureTech 110
Citroën Berlingo III FR
2018-2025 1.5L I4 Diesel BlueHDi 100
Common Questions
What does code U2064 mean on a 2020-2024 Citroën C4?
U2064 stands for "Module Not Configured". A control module has been installed but not configured or initialized for operation in this vehicle.
What are the symptoms of U2064 on a Citroën C4?
Common symptoms of U2064 include: Module features not working, System reports module not present, Cannot access module settings, Module in manufacturing mode.
What causes U2064 on a 2020-2024 Citroën C4?
Common causes of U2064 include: New module not initialized, Configuration procedure not performed, Module programming incomplete, End-of-line setup not done.