Exhaust Camshaft Position Actuator Circuit/Open Bank 1
2021-2024 Dacia Spring Electric 🇩🇪
Description
The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
Symptoms
- Check Engine Light
- Rough idle
- Poor emissions
- Reduced power
Common Causes
- Faulty exhaust VVT solenoid
- Wiring damage
- PCM failure
- Low oil level
Diagnostic Steps
- Test VVT solenoid resistance
- Inspect wiring
- Check oil level
- Command solenoid with scan tool
Repair Notes
Replace exhaust VVT solenoid or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0013 on Other Vehicles
Dacia Bigster
2025-2025 1.2L I3 Turbo TCe 130
Dacia Bigster
2025-2025 1.6L I4 Hybrid 155
Dacia Duster
2017-2024 1.0L I3 TCe
Dacia Duster
2017-2024 1.3L I4 TCe
Dacia Duster
2017-2024 1.5L I4 dCi
Dacia Duster
2024-2025 1.0L I3 TCe 100 LPG
Dacia Duster
2024-2025 1.2L I3 Hybrid TCe 130
Dacia Duster PL
2018-2025 1.0L I3 Turbo TCe 100
Common Questions
What does code P0013 mean on a 2021-2024 Dacia Spring?
P0013 stands for "Exhaust Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the exhaust camshaft position actuator (VVT solenoid) circuit for Bank 1.
What are the symptoms of P0013 on a Dacia Spring?
Common symptoms of P0013 include: Check Engine Light, Rough idle, Poor emissions, Reduced power.
What causes P0013 on a 2021-2024 Dacia Spring?
Common causes of P0013 include: Faulty exhaust VVT solenoid, Wiring damage, PCM failure, Low oil level.