ECM/PCM Software Version Mismatch
2021-2024 Dacia Spring Electric 🇩🇪
Description
The ECM/PCM software does not match the expected version for the vehicle configuration and other installed modules.
Symptoms
- Check Engine Light
- Driveability issues
- Other modules reporting ECM incompatibility
- System features not working correctly
Common Causes
- ECM not updated during recall
- Wrong calibration applied
- Partial powertrain update
- ECM replaced with wrong software version
Diagnostic Steps
- Check ECM software calibration ID
- Compare to required version for vehicle VIN
- Flash ECM with correct calibration
- Update TCM if required for compatibility
- Verify drive cycle completion after update
Repair Notes
Update ECM/PCM to correct calibration. TCM may also need updating for compatibility.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U3001 on Other Vehicles
Dacia Bigster
2025-2025 1.2L I3 Turbo TCe 130
Dacia Bigster
2025-2025 1.6L I4 Hybrid 155
Dacia Duster
2017-2024 1.0L I3 TCe
Dacia Duster
2017-2024 1.3L I4 TCe
Dacia Duster
2017-2024 1.5L I4 dCi
Dacia Duster
2024-2025 1.0L I3 TCe 100 LPG
Dacia Duster
2024-2025 1.2L I3 Hybrid TCe 130
Dacia Duster PL
2018-2025 1.0L I3 Turbo TCe 100
Common Questions
What does code U3001 mean on a 2021-2024 Dacia Spring?
U3001 stands for "ECM/PCM Software Version Mismatch". The ECM/PCM software does not match the expected version for the vehicle configuration and other installed modules.
What are the symptoms of U3001 on a Dacia Spring?
Common symptoms of U3001 include: Check Engine Light, Driveability issues, Other modules reporting ECM incompatibility, System features not working correctly.
What causes U3001 on a 2021-2024 Dacia Spring?
Common causes of U3001 include: ECM not updated during recall, Wrong calibration applied, Partial powertrain update, ECM replaced with wrong software version.