Temperature Gauge Circuit Malfunction
2012-2016 Ferrari FF 6.3L V12 🇩🇪
Description
The engine temperature gauge in the instrument cluster is not functioning or reads incorrectly.
Symptoms
- Temperature gauge stuck at cold
- Gauge stuck at hot
- Temperature gauge erratic
- No temperature warning capability
Common Causes
- Faulty coolant temperature sender for gauge
- Cluster gauge failure
- Wiring issue
- Sender connector corroded
Diagnostic Steps
- Check coolant temp sender resistance
- Test gauge with simulated resistance
- Inspect sender connector
- Compare scan tool temp to gauge reading
Repair Notes
Replace coolant temperature sender for gauge (separate from ECT sensor) or repair cluster.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B0404 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code B0404 mean on a 2012-2016 Ferrari FF?
B0404 stands for "Temperature Gauge Circuit Malfunction". The engine temperature gauge in the instrument cluster is not functioning or reads incorrectly.
What are the symptoms of B0404 on a Ferrari FF?
Common symptoms of B0404 include: Temperature gauge stuck at cold, Gauge stuck at hot, Temperature gauge erratic, No temperature warning capability.
What causes B0404 on a 2012-2016 Ferrari FF?
Common causes of B0404 include: Faulty coolant temperature sender for gauge, Cluster gauge failure, Wiring issue, Sender connector corroded.