Home/DTC Codes/Ford/Explorer/2002-2005 4.6L V8/P3067

P3067

Transmission Output Shaft Bearing Noise Detected

2002-2005 Ford Explorer 4.6L V8 🇩🇪

Critical SeverityPowertrain

Description

The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.

Symptoms

Whining noise proportional to vehicle speed
Noise changes with load but not with gear
Vibration felt through floor
Noise present in all gears
Transmission fluid may have metallic sheen

Common Causes

Output shaft bearing wear
Insufficient lubrication
Bearing preload incorrect
High mileage wear
Contaminated fluid causing bearing damage

Diagnostic Steps

Listen for bearing noise at varying speeds
Check transmission fluid for metal particles
Perform vibration analysis
Road test in multiple gears to isolate source
Inspect transmission for external leaks

Repair Notes

Transmission removal and bearing replacement required. Inspect output shaft for scoring. Replace fluid and filter.

Other Powertrain Codes

P3067 on Other Vehicles

Common Questions

What does code P3067 mean on a 2002-2005 Ford Explorer?

P3067 stands for "Transmission Output Shaft Bearing Noise Detected". The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.

What are the symptoms of P3067 on a Ford Explorer?

Common symptoms of P3067 include: Whining noise proportional to vehicle speed, Noise changes with load but not with gear, Vibration felt through floor, Noise present in all gears, Transmission fluid may have metallic sheen.

What causes P3067 on a 2002-2005 Ford Explorer?

Common causes of P3067 include: Output shaft bearing wear, Insufficient lubrication, Bearing preload incorrect, High mileage wear, Contaminated fluid causing bearing damage.

View Labor Times | View Torque Specs | View Fluid Specs