DCT Gearshift Actuator Drum Position Error
2009-2012 Ford Flex 3.5L V6 🇩🇪
Description
The gear selector drum actuator in the DCT is not achieving the correct position for the requested gear.
Symptoms
- Check Engine Light
- Failure to select requested gear
- Neutral between shifts
- Grinding during gear changes
- Transmission stuck in one gear
- Complete loss of drive
Common Causes
- Gear selector drum actuator failure
- Position sensor malfunction
- Mechanical obstruction in drum
- Hydraulic pressure loss
- Synchronizer ring damage
Diagnostic Steps
- Read gear drum position PID
- Command gear selection and monitor response
- Check hydraulic pressure at actuator
- Inspect selector drum position sensor
- Listen for mechanical noise during shifts
Repair Notes
Replace gear selector drum actuator or repair hydraulic system. May require transmission removal for synchronizer inspection.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3044 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code P3044 mean on a 2009-2012 Ford Flex?
P3044 stands for "DCT Gearshift Actuator Drum Position Error". The gear selector drum actuator in the DCT is not achieving the correct position for the requested gear.
What are the symptoms of P3044 on a Ford Flex?
Common symptoms of P3044 include: Check Engine Light, Failure to select requested gear, Neutral between shifts, Grinding during gear changes, Transmission stuck in one gear, Complete loss of drive.
What causes P3044 on a 2009-2012 Ford Flex?
Common causes of P3044 include: Gear selector drum actuator failure, Position sensor malfunction, Mechanical obstruction in drum, Hydraulic pressure loss, Synchronizer ring damage.