CVT Secondary Pulley Speed Sensor Circuit
2012-2018 Ford Focus Electric Electric Motor 🇩🇪
Description
The secondary (output) pulley speed sensor in the CVT is malfunctioning.
Symptoms
- Check Engine Light
- Incorrect speed display
- Transmission ratio errors
- Harsh ratio changes
- Limp mode
- No speedometer reading
Common Causes
- Faulty secondary speed sensor
- Damaged wiring
- Tone ring contamination
- Corroded connector
- Sensor air gap incorrect
Diagnostic Steps
- Read secondary pulley speed PID
- Test sensor resistance
- Inspect wiring and connector
- Check tone ring condition
- Compare to vehicle speed sensor
Repair Notes
Replace secondary pulley speed sensor.
Related Codes
Other Powertrain Codes
- P0070Ambient Air Temperature Sensor Circuit
- P0071Ambient Air Temperature Sensor Range/Performance
- P0072Ambient Air Temperature Sensor Circuit Low
- P0073Ambient Air Temperature Sensor Circuit High
- P0115Engine Coolant Temperature (ECT) Sensor 1 Circuit
- P0116ECT Sensor 1 Circuit Range/Performance
- P0117ECT Sensor 1 Circuit Low Input
- P0118ECT Sensor 1 Circuit High Input
- P0119ECT Sensor 1 Circuit Intermittent
- P0125Insufficient Coolant Temperature for Closed Loop Fuel Control
P3022 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code P3022 mean on a 2012-2018 Ford Focus Electric?
P3022 stands for "CVT Secondary Pulley Speed Sensor Circuit". The secondary (output) pulley speed sensor in the CVT is malfunctioning.
What are the symptoms of P3022 on a Ford Focus Electric?
Common symptoms of P3022 include: Check Engine Light, Incorrect speed display, Transmission ratio errors, Harsh ratio changes, Limp mode, No speedometer reading.
What causes P3022 on a 2012-2018 Ford Focus Electric?
Common causes of P3022 include: Faulty secondary speed sensor, Damaged wiring, Tone ring contamination, Corroded connector, Sensor air gap incorrect.