P1383moderate severityPowertrain
Variable Cam Timing Over-Retarded (Bank 1)
on 2005 Ford Ranger 3.0L V6 Vulcan · 4WD
What this code means
The variable camshaft timing system on Bank 1 is over-retarded beyond the PCM commanded position.
Symptoms
- Check Engine Light
- Loss of power
- Poor fuel economy
- Rough idle
Common causes
- Stuck VCT solenoid
- Dirty engine oil
- Worn VCT phaser
- Low oil pressure
- Timing chain wear
Diagnostic steps
- Check oil level and condition
- Test VCT solenoid
- Monitor cam timing on scan tool
- Check oil pressure
Repair notes
Change oil. Replace VCT solenoid or phaser if needed.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1