ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free →
Home/DTC Codes/Peugeot/308/2013-2021 1.2L I3 PureTech/C0079
C0079

Steering Position Sensor Circuit High

2013-2021 Peugeot 308 1.2L I3 PureTech 🇩🇪

Moderate SeverityChassis

Description

The steering angle sensor signal voltage is higher than the maximum expected value.

Symptoms

  • Stability control disabled
  • ESC light on
  • Incorrect steering position displayed

Common Causes

  • Signal wire open circuit
  • Short to battery voltage
  • Sensor reference voltage issue
  • Sensor failure

Diagnostic Steps

  1. Test signal voltage at sensor connector
  2. Check for open circuits in signal wire
  3. Verify reference voltage
  4. Monitor output through full range
  5. Inspect connector pins

Repair Notes

Repair open circuit or replace steering angle sensor.

Related Codes

C0076Steering Angle Sensor CircuitC0077Steering Position Sensor Range/PerformanceC0078Steering Position Sensor Circuit Low

Other Chassis Codes

C0079 on Other Vehicles

Peugeot 108

2014-2021 1.0L I3 VTi 72

Peugeot 108

2014-2021 1.2L I3 PureTech 82

Peugeot 2008

2019-2024 1.2L I3 PureTech

Peugeot 2008

2019-2024 Electric

Peugeot 2008

2019-2025 1.2L I3 Turbo PureTech 130

Peugeot 2008

2020-2025 Electric e-2008 50kWh

Peugeot 2008 PL

2019-2025 1.2L I3 Turbo PureTech 130

Peugeot 2008 PL

2019-2025 1.5L I4 Diesel BlueHDi 110

Common Questions

What does code C0079 mean on a 2013-2021 Peugeot 308?

C0079 stands for "Steering Position Sensor Circuit High". The steering angle sensor signal voltage is higher than the maximum expected value.

What are the symptoms of C0079 on a Peugeot 308?

Common symptoms of C0079 include: Stability control disabled, ESC light on, Incorrect steering position displayed.

What causes C0079 on a 2013-2021 Peugeot 308?

Common causes of C0079 include: Signal wire open circuit, Short to battery voltage, Sensor reference voltage issue, Sensor failure.

View Labor Times | View Torque Specs | View Fluid Specs