Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor B
2013-2021 Peugeot 308 1.2L I3 PureTech π©πͺ
Description
The crankshaft and Bank 1 exhaust camshaft position signals do not correlate properly.
Symptoms
- Check Engine Light
- Rough running
- Engine noise
- No start condition
Common Causes
- Timing chain issue
- Exhaust VVT solenoid failure
- Sensor failure
- Worn timing components
Diagnostic Steps
- Check timing chain alignment
- Test exhaust VVT solenoid
- Inspect sensors
- Check oil condition
Repair Notes
Repair timing system or VVT components.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0017 on Other Vehicles
Peugeot 108
2014-2021 1.0L I3 VTi 72
Peugeot 108
2014-2021 1.2L I3 PureTech 82
Peugeot 2008
2019-2024 1.2L I3 PureTech
Peugeot 2008
2019-2024 Electric
Peugeot 2008
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 2008 PL
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 2008 PL
2019-2025 1.5L I4 Diesel BlueHDi 110
Peugeot 208
2012-2019 1.2L I3 PureTech
Common Questions
What does code P0017 mean on a 2013-2021 Peugeot 308?
P0017 stands for "Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor B". The crankshaft and Bank 1 exhaust camshaft position signals do not correlate properly.
What are the symptoms of P0017 on a Peugeot 308?
Common symptoms of P0017 include: Check Engine Light, Rough running, Engine noise, No start condition.
What causes P0017 on a 2013-2021 Peugeot 308?
Common causes of P0017 include: Timing chain issue, Exhaust VVT solenoid failure, Sensor failure, Worn timing components.