P2419
EVAP Switching Valve Control Circuit Low
2013-2021 Peugeot 308 1.2L I3 PureTech 🇩🇪
Low SeverityPowertrain
Description
Low signal on the EVAP system switching valve circuit.
Symptoms
- Check engine light
- EVAP test failure
Common Causes
- Valve circuit short to ground
- Failed valve solenoid
- Wiring damage
Diagnostic Steps
- Check valve connector
- Measure solenoid resistance
- Check wiring
Repair Notes
Replace valve or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2419 on Other Vehicles
Peugeot 108
2014-2021 1.0L I3 VTi 72
Peugeot 108
2014-2021 1.2L I3 PureTech 82
Peugeot 2008
2019-2024 1.2L I3 PureTech
Peugeot 2008
2019-2024 Electric
Peugeot 2008
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 2008 PL
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 208
2012-2019 1.2L I3 PureTech
Peugeot 208
2012-2019 1.6L I4 BlueHDi
Common Questions
What does code P2419 mean on a 2013-2021 Peugeot 308?
P2419 stands for "EVAP Switching Valve Control Circuit Low". Low signal on the EVAP system switching valve circuit.
What are the symptoms of P2419 on a Peugeot 308?
Common symptoms of P2419 include: Check engine light, EVAP test failure.
What causes P2419 on a 2013-2021 Peugeot 308?
Common causes of P2419 include: Valve circuit short to ground, Failed valve solenoid, Wiring damage.