P2769
Torque Converter Clutch Duty Cycle Not Understood
2013-2021 Peugeot 308 1.2L I3 PureTech 🇩🇪
Moderate SeverityPowertrain
Description
The TCM cannot determine the correct duty cycle for TCC operation.
Symptoms
- Check engine light
- TCC shudder
- Abnormal converter operation
Common Causes
- TCM calibration issue
- Input sensor fault
- Solenoid performance issue
Diagnostic Steps
- Check input speed sensor
- Update TCM calibration if TSB exists
- Monitor TCC data
Repair Notes
Update TCM software. Replace solenoid if mechanical fault.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2769 on Other Vehicles
Peugeot 108
2014-2021 1.0L I3 VTi 72
Peugeot 108
2014-2021 1.2L I3 PureTech 82
Peugeot 2008
2019-2024 1.2L I3 PureTech
Peugeot 2008
2019-2024 Electric
Peugeot 2008
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 2008
2020-2025 Electric e-2008 50kWh
Peugeot 2008 PL
2019-2025 1.2L I3 Turbo PureTech 130
Peugeot 2008 PL
2019-2025 1.5L I4 Diesel BlueHDi 110
Common Questions
What does code P2769 mean on a 2013-2021 Peugeot 308?
P2769 stands for "Torque Converter Clutch Duty Cycle Not Understood". The TCM cannot determine the correct duty cycle for TCC operation.
What are the symptoms of P2769 on a Peugeot 308?
Common symptoms of P2769 include: Check engine light, TCC shudder, Abnormal converter operation.
What causes P2769 on a 2013-2021 Peugeot 308?
Common causes of P2769 include: TCM calibration issue, Input sensor fault, Solenoid performance issue.