Transmission Output Shaft Bearing Noise Detected
2017-2025 Renault Kwid 1.0L I3 SCe Flex 🇩🇪
Description
The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.
Symptoms
- Whining noise proportional to vehicle speed
- Noise changes with load but not with gear
- Vibration felt through floor
- Noise present in all gears
- Transmission fluid may have metallic sheen
Common Causes
- Output shaft bearing wear
- Insufficient lubrication
- Bearing preload incorrect
- High mileage wear
- Contaminated fluid causing bearing damage
Diagnostic Steps
- Listen for bearing noise at varying speeds
- Check transmission fluid for metal particles
- Perform vibration analysis
- Road test in multiple gears to isolate source
- Inspect transmission for external leaks
Repair Notes
Transmission removal and bearing replacement required. Inspect output shaft for scoring. Replace fluid and filter.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3067 on Other Vehicles
Renault Arkana
2021-2024 1.3L I4 TCe
Renault Arkana
2021-2024 1.6L Hybrid
Renault Arkana
2021-2025 1.3L I4 TCe 140
Renault Arkana
2021-2025 1.6L I4 Hybrid E-Tech 145
Renault Arkana FR
2021-2025 1.3L I4 Turbo TCe 140
Renault Arkana FR
2021-2025 1.6L I4 Hybrid E-Tech 145
Renault Austral
2022-2025 1.2L I3 Hybrid E-Tech
Renault Austral
2022-2025 1.3L I4 TCe 140
Common Questions
What does code P3067 mean on a 2017-2025 Renault Kwid?
P3067 stands for "Transmission Output Shaft Bearing Noise Detected". The TCM or vibration sensor has detected a signature consistent with output shaft bearing wear in the transmission.
What are the symptoms of P3067 on a Renault Kwid?
Common symptoms of P3067 include: Whining noise proportional to vehicle speed, Noise changes with load but not with gear, Vibration felt through floor, Noise present in all gears, Transmission fluid may have metallic sheen.
What causes P3067 on a 2017-2025 Renault Kwid?
Common causes of P3067 include: Output shaft bearing wear, Insufficient lubrication, Bearing preload incorrect, High mileage wear, Contaminated fluid causing bearing damage.