P0443low severityPowertrain
EVAP System Purge Control Valve Circuit
on 2009 Subaru Forester 2.5L H4 · AWD
What this code means
Malfunction in the EVAP purge control valve electrical circuit.
Symptoms
- Check Engine Light
- EVAP system not purging
Common causes
- Faulty purge valve solenoid
- Wiring damage
- PCM driver failure
Diagnostic steps
- Test purge valve solenoid resistance
- Check wiring
- Command purge valve with scan tool
Repair notes
Replace purge valve or repair wiring.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1