Back to 1996 Subaru SVX

1996 SUBARU SVX

3.3L H6AWDAUTOMATICgas
Repairs0Labor514Torque6087Fluid9DTC633Battery0Maintenance0Recalls0
C0131moderate severityChassis

Brake Pad Wear Sensor Circuit Rear

on 1996 Subaru SVX 3.3L H6 · AWD

What this code means

The rear brake pad wear sensor indicates pads are worn or the circuit is faulty.

Symptoms

  • Brake pad warning light
  • Service message for rear brakes
  • Reduced braking from rear

Common causes

  • Rear brake pads at minimum thickness
  • Wear sensor wire damaged
  • Connector not reattached after service

Diagnostic steps

  1. Check rear brake pad thickness
  2. Inspect wear sensor wire
  3. Check sensor connector
  4. Measure pad thickness

Repair notes

Replace rear brake pads and wear sensors.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →