2007-2011 Honda CR-V Steering Angle Sensor Torque Specs

2.4L I4

Applies to 2007, 2008, 2009, 2010, and 2011 Honda CR-V

Labor Time:1.1 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	11	8	—
Cover Screws	11	8	—
Mounting Bolts	27	20	—
Mounting Bolts	27	20	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	102	75	—
Rack Bolts	102	75	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod Nut	54	40	—
⚠️ Tie Rod Nut	54	40	—
⚠️ Wheel Lug Nuts	136	100	—
Wheel Lug Nuts	136	100	—

The primary torque specification for steering angle sensor on a 2007-2011 Honda CR-V is 11 Nm (8 lb-ft).

There are 16 torque specifications for steering angle sensor on the 2007-2011 Honda CR-V 2.4L I4, covering all related fasteners and components.