2010-2016 Cadillac SRX Long Block Replacement Torque Specs

3.0L V6

Applies to 2010, 2011, 2012, 2013, 2014, 2015, and 2016 Cadillac SRX

Labor Time:12 hours

Torque Values (40 specifications)

Component	Nm	lb-ft	Notes
⚠️ Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
Camshaft Cap Bolts	14	10	Tighten in sequence from center outward, multiple passes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	18	13	—
Cover Bolts	18	13	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	21	16	—
Gasket Bolts	21	16	—
Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Intake Manifold Bolts	25	18	—
Intake Manifold Bolts	25	18	—
Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Mounting Bolts	50	37	—
⚠️ Mounting Bolts	50	37	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
Oil Pan Bolts	12	9	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
⚠️ Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
Timing Chain Tensioner Bolt	25	18	Install with pin/clip to compress
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Timing Cover Bolts - 8mm	25	18	Tighten in sequence
Transmission-to-Engine Bolts	55	41	—
⚠️ Transmission-to-Engine Bolts	55	41	—
Valve Cover Bolts	10	7	Tighten in sequence
Valve Cover Bolts	10	7	Tighten in sequence

Other Jobs with Torque Specs

Common Questions

What is the torque spec for long block replacement on a 2010-2016 Cadillac SRX?

The primary torque specification for long block replacement on a 2010-2016 Cadillac SRX is 14 Nm (10 lb-ft). Note: Tighten in sequence from center outward, multiple passes

How many torque specs are there for Cadillac SRX long block replacement?

There are 40 torque specifications for long block replacement on the 2010-2016 Cadillac SRX 3.0L V6, covering all related fasteners and components.