2001-2010 Chrysler Sebring Short Block Replacement Torque Specs

3.5L V6

Applies to 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Chrysler Sebring

Labor Time:15 hours

Torque Values (19 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	19	14	—
Cover Bolts	19	14	—
⚠️ Crankshaft Pulley Bolt	180	133	Often TTY - check spec, may require impact
Electrical Connector Bolts	8	6	—
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	23	17	—
⚠️ Gasket Surface Bolts	23	17	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
Mounting Bolts	31	23	—
⚠️ Mounting Bolts	55	40	—
⚠️ Mounting Bolts	54	40	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	—
⚠️ Oil Pump Bolts	12	9	—
Sensor Bolts	12	9	—
Sensor Mounting Bolts	12	9	—
⚠️ Timing Cover Bolts - 8mm	25	18	Tighten in sequence
⚠️ Transmission-to-Engine Bolts	55	41	—

Other Jobs with Torque Specs

Common Questions

What is the torque spec for short block replacement on a 2001-2010 Chrysler Sebring?

The primary torque specification for short block replacement on a 2001-2010 Chrysler Sebring is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

How many torque specs are there for Chrysler Sebring short block replacement?

There are 19 torque specifications for short block replacement on the 2001-2010 Chrysler Sebring 3.5L V6, covering all related fasteners and components.