2004-2012 GMC Canyon Driveshaft Torque Specs

2.8L I4

Applies to 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, and 2012 GMC Canyon

Labor Time:1.5 hours

Torque Values (22 specifications)

Component	Nm	lb-ft	Notes
⚠️ Axle Nut	256	189	Use new nut, stake after
Axle Nut	256	189	Use new nut, stake after
⚠️ CV Bolts	64	47	—
CV Bolts	64	47	—
⚠️ CV Joint Bolts	64	47	—
CV Joint Bolts	64	47	—
Cover Screws	11	8	—
Cover Screws	11	8	—
⚠️ Differential Cover Bolts	35	26	Apply RTV sealant
Differential Cover Bolts	35	26	Apply RTV sealant
Differential Yoke Pinion Nut	200	148	Mark position before removal
⚠️ Differential Yoke Pinion Nut	200	148	Mark position before removal
Driveshaft Bolts	79	58	—
⚠️ Driveshaft Bolts	79	58	—
Driveshaft Center Support	35	26	—
Driveshaft Center Support	35	26	—
⚠️ Driveshaft U-Joint Straps	20	15	Tighten evenly
Driveshaft U-Joint Straps	20	15	Tighten evenly
Mounting Bolts	28	21	—
Mounting Bolts	28	21	—
⚠️ Wheel Lug Nuts	142	105	—
Wheel Lug Nuts	142	105	—

The primary torque specification for driveshaft on a 2004-2012 GMC Canyon is 256 Nm (189 lb-ft). Note: Use new nut, stake after

There are 22 torque specifications for driveshaft on the 2004-2012 GMC Canyon 2.8L I4, covering all related fasteners and components.