2000-2008 Jaguar S-Type Piston Rings - All Torque Specs

3.0L V6

Applies to 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, and 2008 Jaguar S-Type

Labor Time:20 hours

Torque Values (13 specifications)

Component	Nm	lb-ft	Notes
⚠️ Connecting Rod Bolts	45	33	TTY - critical torque plus angle
Cover Bolts	18	13	—
⚠️ Cylinder Head Bolts	65	48	TTY - tighten in sequence plus angle
Electrical Connector Bolts	7	5	—
⚠️ Gasket Bolts	21	16	—
⚠️ Gasket Surface Bolts	22	16	Clean mating surfaces
⚠️ Main Bearing Cap Bolts	75	55	TTY - tighten in sequence plus angle
⚠️ Mounting Bolts	50	37	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Oil Pan Bolts	12	9	Tighten in sequence
⚠️ Oil Pump Pickup Tube	12	9	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—

The primary torque specification for piston rings - all on a 2000-2008 Jaguar S-Type is 45 Nm (33 lb-ft). Note: TTY - critical torque plus angle

There are 13 torque specifications for piston rings - all on the 2000-2008 Jaguar S-Type 3.0L V6, covering all related fasteners and components.