2010-2016 Land Rover LR4 Engine R&R Torque Specs

5.0L V8

Applies to 2010, 2011, 2012, 2013, 2014, 2015, and 2016 Land Rover LR4

Labor Time:10 hours

Torque Values (17 specifications)

Component	Nm	lb-ft	Notes
⚠️ AC Compressor Bolts	25	18	—
⚠️ Alternator Mounting Bolts	50	37	—
Cover Bolts	20	15	—
Electrical Connector Bolts	8	6	—
⚠️ Engine Mount-to-Block Bolts	65	48	—
⚠️ Engine Mount-to-Frame Bolts	75	55	—
⚠️ Exhaust Manifold Nuts	30	22	Apply anti-seize, work hot-to-cold
⚠️ Flywheel Bolts	95	70	Often TTY, tighten in star pattern
⚠️ Gasket Bolts	25	19	—
⚠️ Gasket Surface Bolts	26	19	Clean mating surfaces
⚠️ Mounting Bolts	60	44	—
⚠️ Oil Drain Plug	35	26	Use new crush washer
⚠️ Power Steering Pump Bolts	25	18	—
Sensor Bolts	14	10	—
Sensor Mounting Bolts	14	10	—
⚠️ Starter Mounting Bolts	50	37	—
⚠️ Transmission-to-Engine Bolts	55	41	—

The primary torque specification for engine r&r on a 2010-2016 Land Rover LR4 is 25 Nm (18 lb-ft).

There are 17 torque specifications for engine r&r on the 2010-2016 Land Rover LR4 5.0L V8, covering all related fasteners and components.