2009-2012 Ram 1500 Driveshaft Torque Specs

4.7L V8

Applies to 2009, 2010, 2011, and 2012 Ram 1500

Labor Time:2 hours

Torque Values (22 specifications)

Component	Nm	lb-ft	Notes
⚠️ Axle Nut	244	180	Use new nut, stake after
Axle Nut	244	180	Use new nut, stake after
⚠️ CV Bolts	61	45	—
CV Bolts	61	45	—
⚠️ CV Joint Bolts	61	45	—
CV Joint Bolts	61	45	—
Cover Screws	11	8	—
Cover Screws	11	8	—
⚠️ Differential Cover Bolts	34	25	Apply RTV sealant
Differential Cover Bolts	34	25	Apply RTV sealant
Differential Yoke Pinion Nut	200	148	Mark position before removal
⚠️ Differential Yoke Pinion Nut	200	148	Mark position before removal
Driveshaft Bolts	75	55	—
⚠️ Driveshaft Bolts	75	55	—
Driveshaft Center Support	35	26	—
Driveshaft Center Support	35	26	—
⚠️ Driveshaft U-Joint Straps	20	15	Tighten evenly
Driveshaft U-Joint Straps	20	15	Tighten evenly
Mounting Bolts	27	20	—
Mounting Bolts	27	20	—
⚠️ Wheel Lug Nuts	136	100	—
Wheel Lug Nuts	136	100	—

The primary torque specification for driveshaft on a 2009-2012 Ram 1500 is 244 Nm (180 lb-ft). Note: Use new nut, stake after

There are 22 torque specifications for driveshaft on the 2009-2012 Ram 1500 4.7L V8, covering all related fasteners and components.